Menu
Original price was: $20.00.$19.00Current price is: $19.00.
NETGEAR AGM732F SFP GBIC compatible SFP transceiver supports up to 10km link lengths over LC duplex SMF fiber. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Each SFP transceiver module is individually tested to be used on a series of ProSAFE switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, high speed, this easy to install, hot swappable 1G SFP transceiver is ideal for Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks and other optical links.
Product Specifications
| NETGEAR Compatible | AGM732F | Vendor Name | Fiber Optic Parts |
| Form Factor | SFP | Max Data Rate | 1.25Gbps |
| Wavelength | 1310nm | Max Cable Distance | 10km over SMF
q |
| Connector | LC duplex | Media | MMF
q /SMF q |
| Transmitter Type | FP | Receiver Type | PIN |
| DDM/DOM | Supported | Commercial Temperature Range | -5 to 70°C (23 to 158°F) |
| TX Power | -9.5 ~ -3dBm | Receiver Sensitivity | < -23dBm |
| Power Consumption | <1W | Receiver Overload | -3dBm |
| Bit Error Ratio (BER) | 1E-12
q |
Extinction Ratio | >9dB |
| EMC (Electro Magnetic Compatibility) | Supported | MTBF | 1,000,000 Hours |
| Protocols | IEEE 802.3ah-2004, IEEE 802.3z, SFF-8472, SFP MSA (INF-8074i) Compliant | Warranty | 5 Years |
NETGEAR AGM732F SFP GBIC compatible SFP transceiver supports up to 10km link lengths over LC duplex SMF fiber. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Each SFP transceiver module is individually tested to be used on a series of NETGEAR switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, high speed, this easy to install, hot swappable 1G SFP transceiver is ideal for Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks and other optical links.
Low power consumption <1W, saving power
2ns typical latency, MTBF over 1 million hours
-5℃~70℃ operating temperature
Stainless steel material, anti-corrosion and salt spray resistance
Fully compatible with major networking equipment vendors worldwide
Widely used on 1G switches, routers, servers, NICs and other transmission equipment
Suitable for Internet Service Provider (ISP), Enterprise / Data Center Networks and other optical links
Class 1 laser safety compliant
Class B EMC, IEC 61000-4-2 Anti Electro-Static Discharge and IEC61000-4-3 Radiation Resistant
IEEE 802.3ah-2004, IEEE 802.3z, SFF-8472, SFP MSA (INF-8074i) compliant
